The Harvest Maxi-Stirrer System

By adding a Harvest Maxi-Stirrer to your existing bulk storage you can have guaranteed drying performance, turning your bulk store into an efficient, accurate drying system.

By using the 'Harvest Temperature Drying System', very high rates of drying can be achieved with the correct airflow and temperature.

We can design a new store around this system giving fast, efficient drying whilst still retaining all the benefits of the conventional Bulk Floor Store.

Harvest's policy of design, installation, commisioning and maintenance ensures accurate trouble free performance with a back-up service to match.

Award Winning Features

Winner of the R.A.S.E prestigious Silver Medal Award after appraisel by farmers. The machine was found to have important new features and outstanding advantages to users.

Also awarded the Royal Highland New Implement Silver Award.

• Complete mixing of crop ensures even drying

• Eliminates 'drying front'

• Suitable for use with all combinable crops

• Reduces energy requirements and drying time

• Improves air flow through store

• Prevents over drying of bottom layer

• Available for existing stores or new installations

The movement of the down augers across the main beam ensures the total floor area is 'stirred' with the minimum number of passes. An adjustable 'delay' on the control panel allows variable tracking patterns to be set. The four wheel drive on the box section main beam ensures even and accurate travel along the track.

control box Maximum under beam clearance allows the full storage depth in existing buildings to be utilised. The constant pitch Ribbon flight augers suitable for all combinable crops gives the maximum movement with the lowest possible start up torque. Auger lengths are available for crop depths up to 5 metres.

The modular control panel with starters and selector switches is pre-wired as are the drive motors. All units are tested and run prior to delivery.

Maxi-Stirrer for round silos

The Harvest Maxi-Stirrer for round silos consist of a box steel beam centrally pivoted from the silo roof and running on a track around the inside of the silo just below eaves height. Two down augers move in and out along the main beam as the whole assembly rotates anti-clockwise around the silo. A single drive unit powers both down augers and a fractional horse-power gearbox reduction drive powers the main beam. The maxi-Stirrer is fully guarded to comply with current regulations and comes complete with Rotary Switch and all electrics.